man looking shocked at mold

Is it Safe to Clean Black Mold Yourself?

Black mold is something that no homeowner wants to find in the house. It’s dangerous and difficult to get rid of, which makes many people wonder if it’s possible to do a DIY cleaning. Keep reading for everything you want to know about black mold and whether it’s safe to clean it yourself. 

How Dangerous is Black Mold? 

Unfortunately, black mold is a very toxic substance that can cause a lot of unwanted health problems. How dangerous it can be depends largely on exposure to it. If you are only exposed to black mold one or two times, symptoms of exposure will be minimal, and you likely won’t experience any continuing chronic issues. However, if you have a weak immune system, even limited exposure can contribute to chronic illness. 

The symptoms of one-off black mold exposure consist of the following:

  • Serious headaches
  • Breathing difficulties 
  • High fever
  • Sneezing or coughing 
  • Sinus problems including stuffy nose, runny nose, or nosebleeds
  • Tightening sensation in the chest 
  • A burning feeling while breathing 

The symptoms for repeated exposure to black mold are:

  • Autoimmune diseases 
  • Fatigue
  • Migraines
  • Skin rashes
  • Chronic autoimmune diseases 
  • Muscle aches 
  • Symptoms similar to the cold and flu
  • Asthma 
  • Vomiting and diarrhea 

If exposure to black mold is allowed to continue uninterrupted, black mold poisoning could become deadly. A black mold infestation allowed to remain in the home has been shown to put the lives of adults, children, and pets alike in danger

Can I clean black mold myself?

Because black mold is so dangerous, extra precautions must be taken when cleaning it out. Increased exposure to the mold without proper protective equipment can cause further damage to you. Additionally, if the mold is not cleaned properly with the right materials, it can linger and persist. If black mold remains in the home, you and your family will continue to be exposed and could eventually experience severe symptoms. 

How to remove black mold 

Black moons, and most molds in general, grow and spread through spores. When released into the air, the tiny spores float around undetected. Because the spores are practically invisible, you likely won’t notice when or where they spread. The cleaning process can disrupt these spores spreading them further in and around the home. This is why it is essential that you take necessary precautions before you begin cleaning. Here are a few things to keep in mind if you’re going to attempt black mold removal on your own.

  • Make sure to have personal protection equipment and wear it anytime you are dealing with the mold. This equipment could include a mask and gloves, or more. 
  • While you are working to remove the mold, there should be no one living in the home due to the spore spread. Make arrangements to have your family and pets stay for a few days elsewhere.
  • Know which chemicals you will be using and familiarize yourself with their warning labels. Bleach should not be used on black mold. Rather you should use black mold dedicated removal products.
  • Take pictures or videos and document your process. This could help protect you in case of litigation if something goes wrong.
  • Get a hold of moisture in the home. Once you’ve removed the mold, you want to keep it clean. A drier environment will help.

Contact Moldguys Restoration Today

If you’re ready to get a handle on your mold problem and aren’t quite ready to tackle it yourself, get in touch with the experts at Moldguys for assistance. 

 

young woman looking at mold on the phone

Common Winter Mold Questions

 

The spring and summer may be more common months for mold to appear in the home, but winter also has its own various mold problems. The presence of mold is a year-long issue because mold doesn’t disappear in winter. Homeowners should keep an eye on mold growth in their homes, even during the cold months. Here are a few common winter mold questions that homeowners have every year. 

Does winter kill mold? 

It would be optimistic to think that mold will simply die in the winter. Unlike other plants and organisms that can’t stand up against the cold weather, mold doesn’t wait for the perfect environment; rather, it will grow and spread at just about any time of year if everything is right. 

When temperatures drop to below freezing, mold spores go dormant. This means that they don’t die; they are more in a hibernation state. Once the weather warms up again, they’ll start to grow and spread. 

Does mold grow in call temperatures? 

Mold is a Hardy Organism and not too picky about its environment. In fact, it only really requires three things: plenty of moisture, enough food, and the correct temperature. Different molds have different requirements for what is ideal for them. A few mold types even thrive in the winter months, and you’ll see more growth when the temperatures drop. However, most types of mold prefer a warmer environment, usually between 65 and 85 Degrees Fahrenheit, which, you’ll notice, is about the same temperature that humans prefer. Since most homes are set at around these temperatures, mold is a common problem. During the winter months, when humans crank up the heat, mold can still grow. 

Why does winter mold appear on windows? 

As we mentioned above, in order to grow, mold needs a lot of moisture. During the fall months, when there is generally a lot of precipitation, condensation can collect on the inside of the windows. If the air in the home is too moist, the water won’t evaporate and will sit and collect in window panes and door frames. 

This moisture that is allowed to collect then becomes a perfect damp environment for mold growth. To keep winter window mode in check, keep an eye on the ambient humidity in the home, use ventilation in the warmer months, and manually dry the area with a towel if needed.

How can I prevent mold growth in the winter? 

Because of the presence of a lot of moisture in winter, the cold months can prove to be encouraging mold growth. If you live in an area that is particularly susceptible to mold, here are a few tips to prevent mold from growing in the winter in the 1st place.

  • Keep an eye on the humidity in the home. Ideally, homeowners should keep the level below 50%. 
  • Use mold and mildew cleaners that are specifically designed to get rid of these organisms. Pay specific attention to the bathroom and kitchen. 
  • Remove any damp clothing, carpet, or rugs. Check inside closets for any kind of moisture presence and remove any damaged clothing. Check the bathroom and kitchen rugs to make sure that water has not been collected. 
  • Don’t forget to use ventilation when you are cooking or showering. Removing steam is essential if you want to keep humidity low and mold growth to a minimum. 

Do you have additional mold questions?

If you’ve detected mold in your home this winter and need some assistance, contact the professionals at Moldguys Restoration. With the right equipment, materials, and experience, they’ll be able to get your home mold free in no time.

air purifier in a home

Do Air Purifiers Really Help to Prevent Mold from Growing 

If you’ve experienced mold in your home in the past, you might have invested in an air purifier, as many experts will recommend this. It’s tempting to wonder —are they really doing anything? How do you know if it’s worth the investment? Here are the fast facts on whether air purifiers actually prevent the growth of mold.

Air Purifiers and Mold

Let’s get started. Here’s what you need to know about air purifiers and mold. 

•   Mold Likes Moisture Over Time: To understand how to stop mold from growing, it’s good to start with a basic understanding of how mold grows in the first place! Mold grows in warm, damp places that stay undisturbed for a long period of time.

•   Leaks: Several of the most common causes of mold growth in the home can be traced back to water leakages into the home. Generally, these are leaking roofs or leaking pipes.

•   Condensation: However, moisture can come from perfectly sealed pipes and roofs. If either is improperly insulated, however, excess moisture can be formed by the process of condensation.

•   The Point of Air Purifiers: Air purifiers are optimized to help circulate air. However, many people don’t realize that the air purifier is only one piece of the puzzle. Air purifiers can’t do the entire job themselves—they’re not meant to work in isolation! They can move air around, but you must open windows and doors to help fresh air circulate so that the air purifiers have more to work with—and can remove harmful particles faster.

•   How to Use Air Purifiers Most EffectivelyIn order to get the most out of your air purification system, keep them in spaces that regularly get damp—such as your kitchen or your bathroom. Open up cupboards or other spaces in which you expect there to be mold, and open windows to improve air circulation.

Know When It’s Time for a Specialist: While an air purifier can improve conditions so no more mold will grow, it cannot do anything about already-present mold. For that, just know that it might be time to call in a professional.

Contact us for Mold Remediation 

To conclude, air purifiers can be useful in the prevention of mold, but once mold has already grown it’s time to call in a professional for remediation. If you find yourself overwhelmed with mold or simply want to understand what more you can do to ensure that you don’t end up with a major mold problem, give us a call. We are mold experts and have many years of experience in the industry. Give us a call today to learn more or fill out an online form to schedule a mold remediation service for your home or business!

How to Prevent Mold During Construction

Not only is mold annoying to deal with, but it can also become dangerous if it isn’t handled properly. Unfortunately, mold can easily form during construction. If your home or building is undergoing construction anytime soon, you’ll want to take all necessary precautions to prevent mold.

How to Prevent Mold During Construction

Moisture is the main factor causing mold, so reducing moisture is key in preventing mold. While there are a variety of factors that can contribute to moisture, like humidity, rainwater, and season, you can take some precautions to reduce the moisture. The two most important aspects of preventing mold during construction is the storage site and construction site.

Keep Materials Dry in Storage

The storage location is very important in preventing mold during construction. The location where you are storing materials should be dry and covered. Try to store materials under a sturdy roof and at least a few feet off of the ground. As moisture may be in the air, you can utilize plastic sheets to help keep the materials dry. In the case that the materials do get wet, make sure that they dry properly before using them. If your environment is particularly humid, consider using a dehumidifier. Finally, try to limit the number of time materials will be stored. If you can have materials delivered right before they need to be used, there is a lower chance they will get moldy.

Properly Prepare and Choose Construction Site

Both location and materials in the construction site are integral in preventing mold during construction. Moisture causes mold, so ensure that the construction site is properly equipped to handle any moisture, especially if you are in a particularly humid environment. Additionally, the construction site should have a high water table and drained land so that rain and snow can be redirected away from the site. Finally, do your due diligence on the materials used in the project. For example, subfloors are less likely to grow molds than other materials, but if left exposed for a long time, they definitely can still get molds. Awareness of how materials react to the environment and moisture is very important.

As you can see, reducing moisture is incredibly important in preventing mold. But, sometimes you’re faced with the inevitable. If you do find mold in the construction site, we can help with mold removal. The moment you notice the mold, get in contact with Moldguys for restoration services. Fill out a form online or give us a call at 781-910-5029

Identifying Water Damage in the Basement

Water damage in the basement can be devastating, as it can damage the foundation of the home and lead to costly repairs. Therefore, the sooner you find and identify any areas of water leakage in your basement, the better. Investigating the source of the leak and assessing the damage immediately can save you in the long run. If you have any of the following warning signs, it is important to call in a professional to address the issue.

Visible Signs

There are a few relatively obvious and visible signs of water damage that any average person will notice. If paint or wallpaper starts peeling off the basement walls, that is a big red flag that there is moisture in the walls. When moisture builds up in the cement, it can cause it to flake and break apart, which then causes the paint or wallpaper to flake off as well.

If you have exposed basement walls, you can look at the cement and see if there is a white powdery substance coating the cement. This is a clear sign of water damage; However high the substance is on the wall, is how high the water has reached.

If you have finished walls that are painted, another thing to look for is discoloration. If there are patches of discoloration on the wall, the ceiling or the floor that can be a sure sign that water is seeping in and causing that color change. If a sign has become apparent, that means the water damage needs to be evaluated and addressed right away.

Damp, Musty Odor

Many basements have a specific odor to them that comes from being underground. However, if your basement smells damp or musty, that could be a sign of mold. Mold gives off a very distinct odor, and mold grows in areas where moisture has built up and been unable to drain or evaporate away. If you have visible signs of mold, that is another sign of water damage. Mold is also something that can be dangerous to your health and requires help from a mold remediation specialist.

Cracks

Many people assume some cracks are standard from the foundation settling, but large breaks or cracks near windows or doors can be a sign that water is getting in. If a crack is wider than a 16th of an inch that is a sign of a bigger problem and needs to be resolved before the crack gets any bigger. Cracks around windows or doors can be a sign that there isn’t a good seal and water is coming in.

Contact Moldguys Restoration 

Remember with any of these signs it is important to get a qualified professional to assess the damage and find the source of the water. If you find water damage in your basement in Bridgewater, Plymouth, Nantucket, and beyond, Moldguys Restoration is here to help! Fill out an online contact form or give us a call today at 781-910-5029! 

Putting a Stop to Basement Mold

When it comes to mold in your home, the basement is probably one of the biggest areas of concern. Between the moisture, humidity, darkness, and clutter of all the junk in your basement, mold has everything it needs to make itself a comfortable home. However, that doesn’t mean its welcome… Try these tips to finally put a stop to mold in your basement.

Monitoring and Reducing Humidity

When the humidity in your home reaches above 45%, mold is subject to grow. Using a hygrometer to monitor the levels in your basement can help to keep you informed. If you notice the levels are higher than normal, try a dehumidifier. Make sure to purchase a high-quality one that will be effective. Making sure that all appliances are ventilated to the outside is crucial in keeping the humidity to a minimum. You can also use an exhaust fan to get rid of humid air and allow in fresh air.

Insulate Pipes

You might notice that your cold water pipes in the basement tend to accumulate condensation. As you know, any type of excess moisture is an open invitation to mold. Covering your pipes with insulation can help to reduce the humidity in your basement.

Ditch the Plants

Plants can be a great way to liven up your home, if they’re not kept in the basement. Growing plants in your basement is simply recipe for disaster. Mold and mildew can quickly form in these conditions.

Do a Cleanout

The basement is often where all of our junk gets thrown. Cluttering of boxes, trash, and other items can block air from flowing freely, making ventilation difficult. Using your basement for storage is not ideal, as mold and mildew will make a home on your belongings. Only store necessary items there, and try to keep them off the floors and away from walls.

Contact Moldguys for Basement Mold Removal

If you do notice mold growing in your basement, not only is it unattractive, but it could also be causing harm to you and your family. It’s best to call in a professional, to ensure it is safely and completely removed. Moldguys provides basement removal in Boston, Nantucket, Bridgewater, and surrounding areas. Fill out a contact form or give us a call today at 781-910-5029 to learn more!  

 

Preventing Mold in the Winter

While you may think that now since the hot and humid temperatures are long gone, that means that mold growth is too. But unfortunately, that is not always the case. Under the right conditions, mold can spread and wreak just as much havoc in the winter time. In fact, cranking up the heat during the winter actually provides just the right environment for mold to grow. Not only does it look a bit unappealing, but it can also stir up allergies in your home. Here’s what you can do to help prevent this growth, and keep your home mold-free this winter.

Air Circulation

To ensure that air is flowing properly throughout your home, use fans and open windows on warmer days. Since those are few and far between in the winter, you could also consider purchasing a dehumidifier instead to help reduce moisture. You should aim to keep the humidity level in your home below 40%.

Exhaust Fans

Kitchens and bathrooms are the two biggest culprits when it comes to producing moisture in your home. Between long steamy showers, and boiling pots of water, an excess of condensation can build up if you don’t use exhaust fans. Don’t be afraid to leave them on for a bit even after you’re done cooking or bathing, and wipe down walls with a dry towel to clean up any excess water.

Leaks

Since mold thrives in wet climates, any excess moisture from leaks can encourage mold growth. If you suspect any sort of leak coming from outdoors or in your plumbing this winter, it’s important to take care of it immediately to prevent mold growth. You can take preventative measures by regularly checking places such as the bathroom, or under the kitchen sink.

Contact Moldguys Restoration

If you do find mold growth in your home this winter, it’s always best to call in the professionals to remove it. Even if it is minor growth, household cleaning solutions and bleach typically are too weak to completely remove mold spores. Our team is available 24/7 for emergency calls. Located in East Bridgewater, we also service Plymouth, Nantucket, Boston, and more. Fill out an online contact form or give us a call today at 781-910-5029. 

Preventing Mold in Your Attic

Unless you have a finished, functional attic, most people hardly ever venture up to this space in their home. You may go months at a time without visiting your attic, simply because you have no reason to. However, when you do finally make your way up the stairs to the dark, dingy place that is mostly used for storage, you may find an unpleasant surprise: Mold. With a wet, warm climate, your attic is an inviting place for mold to grow. It may not seem like a huge concern since you’re almost never up there, but don’t underestimate its ability to spread and damage some of your old treasured belongings that cannot be replaced. Taking action and doing routine inspections of your attic can prevent a mold problem from growing out of control.

Roof Issues

If you have a leaky roof, or have in the past, this is a common trigger for mold growth in the attic. Because it is not making an appearance or causing a problem anywhere else in your home, it could be months before a homeowner even notices the damage that has been done. To prevent mold from spreading all over your old pictures and valuables in the attic, perform regular inspection to detect roof leaks early, before it causes further damage.

Improper Ventilation

Although sealing off any vents during the winter to help lower your heating bill may seem like a good idea, you actually need sufficient ventilation to keep your attic cool in the winter time. Without ventilation, the warm air will get trapped in the attic with no place to escape. Because mold thrives in warm places, this is recipe for disaster. Check your soffits to make sure that they are not blocked with insulation, cutting off proper air ventilation.

Water Heaters and Furnaces

Many homes have their water heaters and furnaces installed in the attic. While this solution isn’t quite as simple as picking it up and moving it to a new location, you’ll want to have a professional look at it to make sure it is properly installed and there are no leaks. Routine inspections are a must if your water heaters and furnaces are in the attic, as any sort of moisture is mold’s best friend.

Ice Damming

If water is not being properly drained from your roof, it can freeze and leak into your home through the attic. Gutters should be cleaned at least twice per year to ensure they are working properly. Well-maintained gutters will prevent ice damming and the potential mold growth that could come as a result.

Contact Moldguys Restoration 

If you have come across the unfortunate sight of mold in your home, you’ll want to contact a professional immediately to address the situation. Contact the experts at Moldguys Restoration for quality service today!

Preventing Mold Growth

Finding mold in your home is never pleasant. Between its unsightly appearance, and the potential health hazards it can cause for you and your family, the word itself is probably enough to make you cringe. And sadly, mold has the ability to grow almost anywhere- on the carpet, floor, ceiling, paper, food, inside drywall, etc. Once it has made itself comfortable, it won’t be long before it starts multiplying. That is one of the reasons mold can be so intimidating- it spreads rapidly, and can be tricky to get rid of. The best thing we can do is to try to prevent the growth of mold altogether. The following tips can help to keep you and your home safe from mold.

  1. Keep It Dry:

    It may seem obvious, but this is one of the most crucial factors in keeping your home mold-free. When spills or leaks occur, try to tackle them right away, or at very least within 24-48 hours. After every shower, dry the floors and walls, as this is an optimal time for mold to start growing.  If there’s been any burst pipes or flooding in your home, you may even need to completely remove water-damaged carpets bedding and furniture if they cannot be dried. Additionally, don’t leave wet clothes in the washing machine for an extended period of time. Mold can spread quickly, so try to remove them promptly and when possible, hang outside to dry.  Mold thrives in damp areas, so try to eliminate any potential areas for it could root and spread.

  2. Ventilation:

    Without proper ventilation, some of our everyday domestic activities could be promoting mold growth in your home. Cooking dinner, taking a shower, or doing a load of laundry could be sending an unwanted invitation to mold. You can offset this by using AC units and dehumidifiers in your home to reduce moisture. Opening a window or running an exhaust fan could also work just as well.

  3. Mold-resistant products:

    If you’re starting fresh by building a brand new home, or even renovating an old one, consider using mold-resistant products. Mold-resistant drywall is a good alternative to traditional drywall, as it is paperless. Instead, it is covered in fiberglass, making the service water resistant. This would be highly beneficial to use in rooms that typically acquire the most moisture such as your bathroom, kitchen, laundry room and basement.

Contact Mold Guys Restoration

If you have found that mold has already made its way into your home, contact a professional. Mold Guys Restoration specializes in mold cleanup and remediation. Contact us today to learn more!

 

Tips for Beating Mold and Mildew Before They Start

Mold pops up seemingly out of nowhere. Under the right conditions, it can begin growing in as little as 24 to 48 hours. You won’t have a full-scale problem on your hands right away, but wait long enough and you’ll be wishing you had been a bit more proactive on keeping mold at bay in the first place. Luckily for you, we have some suggestions on how to get the jump on mildew and mold before they ensnare your home in their clutches.

Increase Air Circulation While Reducing Humidity

One of the cheapest ways to do this is simply opening your windows or turning on a fan or two. Although, opening up the windows is likely not an option now that the cold weather has arrived. If you have a bathroom window, however, there is no harm in throwing it open when you take your morning shower in order to prevent moisture from building up in the bathroom. In times of cold weather, consider purchasing a dehumidifier to help reduce overall moisture inside of your living space. If you can, purchase one with digital readings so you can actively keep indoor humidity below 40%.

Quickly Repair Any Leaks

Since mold and mildew grow at a relatively rapid pace, attend to any leaks your home may have. The longer a leak is left unrepaired, the more likely you are to be dealing with the fallout of the mold and damage that comes along with an unattended leak. Fixing the leak as soon as you notice it will only save you time and money in the long run.

Keep Entryway Floors Dry During Wet Weather

While it’s not great to have wall-to-wall carpet, or sections of carpet, in your entryway, you might not have a choice if you’re currently renting your property. If you have carpet up to your door, be sure to vacuum the area regularly when the weather is wet. Regularly inspect carpeted entryways for signs of mold by the baseboards or wherever the carpet meets the wall.

These are a few ways you can help mitigate mold growth in your home. Try them out and you should notice an improvement in areas where you have noticed light to moderate mold activity. If you appear to have a larger problem on your hands than you thought, don’t hesitate to contact us at 781-910-5029 or 781-733-3675. You can also fill out our online contact form!